GearTrax201032位/64位通用版（含破解，汉化) 本人试用了，在论坛上报告过有误报情况 注意 solidwork 需要到 工具->选项中勾上"英文特征"和"英文菜单"并重启后才可以正常建模.
1) Install any of Camnetics2010 programs: CamTrax2010， GearTrax2010， GearTeq2010
此Crack支持以下几个软件：
CAMTrax 2010
CAMTraxMFG 2010
GearTrax 2010
GearTeq 2010
安装以上任意软件后，按下列对应说明破解！！
9cax.com
2) For CamTrax2010
Run this patch， browse to <CamTrax2010 program directory>， select "CamTrax2010.dll" and click "Start > OK"
Run this patch， browse to <CamTrax2010 program directory>， select "CamTrax2010.exe" and click "Start > OK"
3) For CAMTrax MFG (Standalone) 2010
Run this patch， browse to <CamTraxMFG program directory>， select "CamTraxMFG.exe" and click "Start > OK"
4) For CearTrax2010
Run this patch， browse to <GearTrax2010 program directory>， select "GearTrax2010.dll" and click "Start > OK"
Run this patch， browse to <GearTrax2010 program directory>， select "GearTrax2010.exe" and click "Start > OK"
5) For GearTeq2010
Run a program， Select "Full License"， Select "Use a SolidWorks Serial"
Input a GearTeq2010 RegCode witch corresponds to your SW Serial
SW Serial GearTeq2009 RegCode
0101 0000 1289 1488 -> IpMK KUKS SKWA
0001 0001 0736 0361 -> 2QQC 6W6I QC86
9916 5719 6888 1432 -> fQOl bflh fKdd
That'a all.. Enjoy :)
Cracked by TuPis
P.S.
1) You can run CamTrax2010 and GearTrax2010 from Start > All Programs > Camnetics >...
2) Also you can add CamTrax2010 and GearTrax2010 to SW add-in.
To make it:
Start SW
Click "Open" > Select "File type" to be opened- SW add-in (*.dll) > browse to <CamTrax2010 program directory>\CamTrax2010.dll > OK
Click "Open" > Select "File type" to be opened- SW add-in (*.dll) > browse to <GearTrax2010 program directory>\GearTrax2010.dll > OK
After that a "Camnetics" drop-down menu will appear in you SolidWorks Main Menu